Sorry, no posts matched your criteria.
Aurelia Parker Kitchen Ideas, 2018-11-05 07:38:57. * G-Shaped Kitchen - this type of kitchen shape is becoming very popular, and it gives you a fourth wall to use. The G-shape can be used if you have more than one cook in the house. This fourth wall section can be used for a counter, island and storage space. With this kitchen layout you can have two sinks, perhaps two cooktops or two ranges. You could have two working triangles -- one for sink, cook top or range and refrigerator and a second working triangle with another sink, built-in grill and cooktop. It allows two cooks to do different things at the same time and entertain large groups of people.
Aurelia Parker Kitchen Ideas, 2018-11-05 07:38:59. Designing your ultimate kitchen should be a rewarding experience. After you have gathered ideas for your kitchen from a variety of sources, the fun begins when you start to actually incorporate all the different design ideas into a coherent picture of your perfect kitchen. This is the time to ask for assistance from a kitchen design specialist, who can work on the design process with you.
Aurelia Parker Kitchen Ideas, 2018-11-08 03:09:34. It seems that no matter how much time you budget for a remodeling project, it usually takes longer than you expected. For a complete remodel, the down time during construction can be at least two or three months and much longer, depending upon the size and extent of the project. Your family needs to eat in the meantime. So, before construction starts make arrangements to store, heat and clean up, enough to keep you going until the kitchen is back on-line. Many of my clients who have had the good fortune to have a bar sink in the family room, have moved in the old refrigerator and microwave near the bar sink and this combination becomes the interim kitchen during construction of the new one. The upside to this is that it provides a great rationale for eating out more often!
Aurelia Parker Kitchen Ideas, 2018-11-05 07:39:01. U-Shaped Kitchen - this kitchen design online shape has three walls instead of two, and the sink usually is located in the middle wall section. The refrigerator and range or cooktop are usually on the side walls opposite each other. The U-shaped kitchen design gives room for ample countertop space, and you have three walls for cabinets and appliances. This kitchen layout tends to create a working triangle that is very efficient.
Kathie Mejia Kitchen Ideas, 2018-11-05 07:38:58. L-Shaped Kitchen - this is the most popular kitchen design. It consists of a long leg and a shorter one and this type of design can be used in small and large kitchens. The L-shaped kitchen gives you the possibility of having a center island depending on the space available. In general, this design will have 2 or 3 appliances on one wall. The usual arrangement is to have the refrigerator at one end, the range or cooktop at the other end with the sink located in the middle. This shape of kitchen generally provides good traffic flow.
Frankie Barnett Kitchen Ideas, 2018-11-08 03:09:32. I trust that by reading this article, you now have an appreciation of how important careful planning is to the successful design of your kitchen. The more thought and quality time you devote to it, the better prepared you will be when you begin with your designer and the process will become easier and more efficient, which everyone involved will greatly appreciate.
Jeanine Patel Kitchen Ideas, 2018-11-08 03:09:31. THE FIRST STEPS
Karen Gates Kitchen Ideas, 2018-11-05 07:39:00. The place to start when you are designing your dream kitchen is with a dimensional diagram of your kitchen space. On a large piece of graph paper, draw the outline of the kitchen space, including any doors or windows that you will have work around while you design your kitchen. Accurately mark where your plumbing and electrical supplies are located. You can move plumbing and electrical supply points, but this involves more time and money, and it is always easier to accommodate existing service supplies into your design, if practical.
Harriett Decker Kitchen Ideas, 2018-11-08 03:09:33. When you plan to remove or relocate a wall(s), the key factor to determine is, by so doing, will you encounter a load-bearing situation? This occurs when the wall(s) is part of the support system for the structure of the house. Usually a contractor can determine this. If the contractor is uncertain, you will need to have a structural engineer examine the structure to make that determination. If it is non load-bearing, when you are ready to start construction, the contractor can proceed to build out the space per the new plan. If it is a load-bearing issue, your local building authority will require that you retain a structural engineer or an architect to design a structural solution for removing or relocating the wall(s).
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does atspune.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.